Endress+Hauser Solimotion FTR20, Руководство по эксплуатации

Страница: 46 / 60

Solimotion FTR20 Commissioning
46 Hauser
Function Description Default value
6 Limit signal function
7 Switch-on delay
8 Switch-off delay
9 Simulation ―
A Damping
B Gain
C Detection range
D - has no function - ―
E - has no function - ―
F Reset to factory settings ―
8�6 Simulation
The Solimotion FTR20 gives you the ability to simulate a signal and thereby an output
variable, independent of the process, for example, in order to configure a downstream PLC or
a data logger.
The simulation is carried out as follows (function 6 = standard setting):
Move the encoding switch to position 9
→ Display of the function number
→ After 2 seconds: Display of the simulated signal strength
(signal strength = 0 LEDs, switch output: not switched,
current output: 4 mA)
Press the or key on the device to configure the desired signal strength
→ Display of the changed simulated signal strength, example:
(signal strength = 8 LEDs, switch output: switched,
current output: 16.8 mA)
Move the encoding switch to the initial position 0
→ Display of the current signal strength
The simulation ends as soon as the encoding switch is no longer at position 9.