Endress+Hauser RIA15, Руководство по эксплуатации

Страница: 7 / 32

RIA15 Safety instructions
Hauser 7
• The manufacturer accepts no liability for damages resulting from incorrect use or use other
than that designated. It is not permitted to convert or modify the device in any way.
• Panel-mounted device:
The device is designed for installation in a panel and must only be operated in an installed
state.
• Field device:
The device is designed for installation in the field.
• The device may only be operated under the permitted ambient conditions (
®
ä 25).
2.3 Workplace safety
For work on and with the device:
►
Wear the required personal protective equipment according to federal/national regulations.
2.4 Operational safety
Risk of injury.
►
Operate the device in proper technical condition and fail-safe condition only.
►
The operator is responsible for interference-free operation of the device.
Conversions to the device
Unauthorized modifications to the device are not permitted and can lead to unforeseeable
dangers.
►
If, despite this, modifications are required, consult with Hauser.
Repair
To ensure continued operational safety and reliability,
►
Carry out repairs on the device only if they are expressly permitted.
►
Observe federal/national regulations pertaining to repair of an electrical device.
►
Use original spare parts and accessories from Hauser only.
Environmental requirements
If a plastic transmitter housing is permanently exposed to certain steam and air mixtures, this
can damage the housing.
►
If you are unsure, please contact your Hauser Sales Center for clarification.
►
If used in an approval-related area, observe the information on the nameplate.
2.5 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which
they are safe to operate.
It meets general safety standards and legal requirements. It also complies with the EC
directives listed in the device-specific EC Declaration of Conformity. Hauser confirms
this by affixing the CE mark to the device.