Endress+Hauser RIA15, Руководство по эксплуатации

Страница: 20 / 32

Commissioning RIA15
20 Hauser
Setup menu (SETUP)
Parameter Values Description
SC_20 Numerical value
–19
999 to 99 999
Default: 100.0
5-digit value (number of decimal places as configured under
DECIM) for scaling the measured value at 20 mA
Example: SC_20 = 100.0
Þ 100.0 displayed at 20 mA
measuring current
The unit selected under UNIT is used to display the value.
UNIT %
°C
°F
K
USER Use this function to select the unit for displaying the value. If
"USER" is selected, a user-defined unit can be entered in the
TEXT parameter.
TEXT Customized text, 5-digit User-defined unit, only visible if the "USER" option has been
selected under UNIT.
Diagnostics menu (DIAG)
Parameter Values Description
AERR Read only The diagnostic message currently pending appears on the
display. If two or more messages occur simultaneously, the
message with the highest priority is shown on the display.
LERR Read only The last diagnostic message with the highest priority appears
on the display.
FWVER Read only The firmware version appears on the display.
Expert menu (EXPRT); a code must be entered
In addition to all the parameters in the Setup menu, the Expert menu also contains the parameters
described in this table.
Parameter Values Description
CODE Numerical value 0000 to 9999
Default:
0000
4-digit access code
A request to enter the access code appears when
the Expert menu is called. You can specify your
own access code in the Code parameter.
SYSTM
UCODE Numerical value 0000 to 9999
Default:
0000
4-digit user code
With the user code it is possible to protect the
device setup from unauthorized modifications. A
padlock symbol is displayed if the setup cannot be
modified.
The user code is not active with the default setting
"0000". This means that a code does not have to be
entered to call up the setup.