Endress+Hauser RIA15, Руководство по эксплуатации

Страница: 12 / 32

Installation RIA15
12 Hauser
Wall mounting
With optionally available mounting kit.
A0017803
å
4
Mounting the process display unit on a wall
1. Use the mounting plate as a stencil for 2 6 mm (0.24 in.) bore holes, 82 mm (3.23 in)
apart, and secure the plate on the wall with 2 screws (not supplied).
2. Open the housing.
3. Secure the display unit on the mounting plate with the 4 screws supplied.
4. Close the cover and tighten the screws.
Without a mounting kit.
1. Open the housing.
2. Use the device as a stencil for 4 6 mm (0.24 in.) bore holes, 99 mm (3.9 in) apart on the
horizontal plane, 66 mm (2.6 in) apart on the vertical plane.
3. Secure the display unit on the wall with 4 screws.