Endress+Hauser Proservo NMS81, Техническая информация

Страница: 45 / 60

Proservo NMS81
Hauser 45
CRN approval The devices have a CRN approval for the following options of the ordering features 010 ("Approval")
and 140 ("Process Connection"):
Condition 1: Approval
010: Approval Meaning
CA CSA C/US General Purpose
CC CSA C/US Cl.I Div.1 Gr.A-D, Ex d[ia] IIC T6
FD FM C/US XP-AIS Cl.I Div.1 Gr.BCD T6, AEx db [ia Ga] IIC T6 Ga/Gb
Condition 2: Process Connection
140: Process Connection Meaning
AFJ NPS 3" Cl.150 RF, 316/316L flange ASME B16.5
AGJ NPS 4" Cl.150 RF, 316/316L flange ASME B16.5
AHJ NPS 6" Cl.150 RF, 316/316L flange ASME B16.5
ASJ NPS 3" Cl.300 RF, 316/316L flange ASME B16.5
ATJ NPS 4" Cl.300 RF, 316/316L flange ASME B16.5
AUJ NPS 4" Cl.300 RF, 316/316L flange ASME B16.5
• Process connections without CRN approval are not included in this table.
• CRN approved devices are marked with the registration number OF18152.5C on the
nameplate.
Pressure equipment with
volume > 1 l (0.264 gal) and
product PS*V >
25 bar l (95.7 psi gal)
Pressure equipment designated for application in every process fluid having a pressurized volume
V > 1 l (0.264 gal) and a max. allowable pressure ≤ 25 bar (362.5 psi) shall satisfy the essential
safety requirements set out in Annex I of the Pressure Equipment Directive 2014/68/EU. According
to Article 13 pressure equipment shall be classified by categories in accordance with Annex II. The
conformity assessment of the pressure equipment shall be determined by the category I under
consideration of the above-mentioned product of pressure and volume PS*V. These devices shall be
provided with CE marking.
Reason:
Pressure Equipment Directive 2014/68/EU, Article 13, Annex II
Note:
A partial examination shall be performed for pressure instruments that are part of safety equipment
for the protection of a pipe or vessel from exceeding allowable limits (equipment with safety
function in accordance with Pressure Equipment Directive 2014/68/EU, Article 2, point 4).
The conformity assessment was performed according to module A.
The NMS81 is not suitable for use with unstable gases at nominal pressures above 25 bar (363 psi).
Test, certificate
Ordering feature 580
"Test, Certificate" Designation
JA 3.1 Material certificate, wetted metallic parts, EN10204-3.1 inspection certificate
JB Conformity to NACE MR0175, wetted metallic parts
JE Conformity to NACE MR0103, wetted metallic parts
KE Pressure test, internal procedure, inspection certificate
KG PMI test (XRF), internal procedure, wetted metallic parts, inspection certificate
KS Welding documentation, wetted/pressurized seams