Activating the battery on connection B2
4
E Hauser
F Configuration 5 for Order-Code DK5004-5
G Cnfiguration 6 for Order-Code DK5004-6
Configuration of batteries
Connectors
Number of batteries
Battery usage
A0017131
B1
1
Backup power supply for the measuring device: B1 has been switched on by the
manufacturer and needn‘t to be considered.
B2
2
Power supply for the measuring device
B3
3
Power supply for the GSM/GPRS modem: B3 has been switched on by the
manufacturer and needn‘t to be considered.
B1
B1 B2 B3
B3
B2
1. Where to find B2 on the display and to
set the numeric value on position 1:
2. To go back into the nominal range, press the ESC button 2 times for 2 seconds.
3. Then check the B2 state of charge of the battery in accordance with the graphic below.
11- INTERNAL DATA
L2 code =
******
Load fact. data
A0019499
Save fact. data
Memory reset
B2 = 1
KF = 1.00000
KF = +1.0053
Configuration of batteries
Connectors
Number of batteries
Battery usage
A0017132
B1
1
Backup power supply for the measuring device: B1 has been switched on by the
manufacturer and needn‘t to be considered.
B2
-
Power supply for the measuring device
B3
3
Power supply for the GSM/GPRS modem: B3 has been switched on by the
manufacturer and needn‘t to be considered.
Powered via external power supply
Power supply for the measuring device
B1:
(
)
B2:
(
)
)
(
)
(
B3:
(
)
)
(
B1
B1 B2 B3
B3
