Endress+Hauser Promag 800 L, Инструкция по установке

Страница: 3 / 8

Activating the battery on connection B2
E Hauser 3
B Configuration 1 for Order-Code DK5004-1
C Configuration 2 for Order-Code DK5004-2
D Configuration 3 for Order-Code DK5004-3
E Configuration 4 for Order-Code DK5004-4
Configuration of batteries Connectors Number of batteries Battery usage
A0017127
B1 1 Backup power supply for the measuring device: B1 has been switched on by the
manufacturer and needn‘t to be considered.
B2 1 Power supply for the measuring device
B3 - Power supply for the GSM/GPRS modem
Configuration of batteries Connectors Number of batteries Battery usage
A0017128
B1 1 Backup power supply for the measuring device: B1 has been switched on by the
manufacturer and needn‘t to be considered.
B2 3 Power supply for the measuring device
B3 - Power supply for the GSM/GPRS modem
Configuration of batteries Connectors Number of batteries Battery usage
A0017129
B1 1 Backup power supply for the measuring device: B1 has been switched on by the
manufacturer and needn‘t to be considered.
B2
3
Power supply for the measuring device
B3 - Power supply for the GSM/GPRS modem
B2
B1
B1 B2 B3
B1
B1 B2 B3
B2
B1 B2 B3
B2 B1
1. Where to find B2 on the display and to
set the numeric value on position 1:
2. Go back into the nominal range, press the ESC button 2 times for 2 seconds.

3. Then check the B2 state of charge of the battery in accordance with the graphic below. 11- INTERNAL DATA
L2 code =
******
Load fact. data
A0019498
Save fact. data
Memory reset
B2 = 1
KF = 1.00000
KF = +1.0053
Configuration of batteries Connectors Number of batteries Battery usage
A0017130
B1 1 Backup power supply for the measuring device: B1 has been switched on by the
manufacturer and needn‘t to be considered.
B2 - Power supply for the measuring device
B3
-
Power supply for the GSM/GPRS modem
Powered via external power supply Power supply for the measuring device
B1 :
( )
B2 :
( )
) (
) (
B1
B1 B2 B3