Proline Promass E 200
Installation
Hauser
21
6.2.5
Turning the display module
+
E
–
1
3 mm
A0013905
6.3
Post-installation check
Is the device undamaged (visual inspection)?
Does the measuring device conform to the measuring point specifications?
For example:
• Process temperature
• Process pressure (refer to the chapter on "Material load curves" of the "Technical Information"
document on the CD-ROM provided)
• Ambient temperature (→ 17)
• Measuring range
Has the correct orientation for the sensor been selected ?
• According to sensor type
• According to medium temperature
• According to medium properties (outgassing, with entrained solids)
Does the arrow on the sensor nameplate match the direction of flow of the fluid through the piping
(→ 16)?
Are the measuring point identification and labeling correct (visual inspection)?
Is the device adequately protected from precipitation and direct sunlight?
Are the securing screw and securing clamp tightened securely?
Содержание Proline Promass E 200
Страница 13: ...Proline Promass E 200 Storage and transport Endress Hauser 13 A0015605...
Страница 48: ...www addresses endress com...