Endress+Hauser Proline Promag P 200, Техническая информация

Страница: 21 / 40

Proline Promag P 200
Hauser 21
100
10
0.5 d / D
[mbar]
0.6 0.7 0.8 0.9
1 m/s
2 m/s
3 m/s
4 m/s
5 m/s
6 m/s
7 m/s
8 m/s
1
D d
max. 8°
A0016359
Special mounting instructions Weather protection cover
To ensure that the optional weather protection cover can be easily opened, maintain the following minimum
head clearance: 350 mm (13.8 in)
Environment
Ambient temperature range
Transmitter –40 to +60 ° C (–40 to +140 ° F)
Local display –20 to +60
°
C (–4 to +140
°
F), the readability of the display may be impaired at
temperatures outside the temperature range.
Sensor • Flange material carbon steel: –10 to +60
°
C (+14 to +140
°
F)
• Flange material stainless steel: –40 to +60 ° C (–40 to +140 ° F)
Liner Do not exceed or fall below the permitted temperature range of the liner
(
®
ä
22).
If operating outdoors:
• Install the measuring device in a shady location.
• Avoid direct sunlight, particularly in warm climatic regions.
• Avoid direct exposure to weather conditions.
Weather protection covers can be ordered from Hauser: see "Accessories" section (
®
ä
36)
Storage temperature The storage temperature corresponds to the operating temperature range of the measuring transmitter and the
appropriate measuring sensors.
• Protect the measuring device against direct sunlight during storage in order to avoid unacceptably high surface
temperatures.
• Select a storage location where moisture cannot collect in the measuring device as fungus or bacteria
infestation can damage the liner.
• If protection caps or protective covers are mounted these should never be removed before installing the
measuring device.
Degree of protection Transmitter
• As standard: IP66/67, type 4X enclosure
• When housing is open: IP20, type 1 enclosure
• Display module: IP22, type 1 enclosure