Electromagnetic
Flow Measuring System
PROline promag 50/53 W
Flow measurement in
water or wastewater applications
Features and benefits
•
Nominal diameters 1” to 78”
•
Hard rubber or polyurethane liners
•
PFA for high-temperature applica-
tions up to +355°F (+180°C)
•
Fitting lengths to ISO and DVGW
•
High measuring accuracy for
improved process control:
– Promag 50: ± 0.5%
(option: ± 0.2%)
– Promag 53: ± 0.2%
•
Robust field housing, NEMA 4X
(IP 67)
•
NEMA 4X (IP 67) wall-mount housing
for straight-forward installation of the
remote version
•
NEMA 6P (IP 68) sensor version
•
Promag 53 with Touch Control:
operation without opening the
housing - also for explosion proof
applications
•
Expandable software packages:
–
electrode cleaning
–
pulsating flow
•
Quick setup menus for straight-
forward commissioning in the field
•
Potable-water approvals:
KTW, WRC, etc.
•
Interfaces for integration into all
major process-control systems:
–
HART
®
interface as standard
–
Promag 50: PROFIBUS-PA
–
Promag 53: PROFIBUS-PA/-DP,
FOUNDATION fieldbus
•
Explosion proof approval for
installation in Division 1 (FM, CSA,
ATEX, etc.)
Application
All fluids with a minimum conductivity of
≥
5
µ
S/cm can be measured:
•
Drinking water
•
Wastewater
•
Wastewater sludge, etc.
A minimum conductivity of
≥
20
µ
S/cm is
required for measuring demineralized
water.
Liner specific applications
•
Polyurethane lining for applications
with cold water and for slightly
abrasive fluids
•
Hard rubber lining for all applications
with water (especially for drinking
water)
Technical
Information
TI 046D/24/ae
The Power of Know How
