Promag 50/53 W
Hauser
25
Certificates and approvals
Hazardous area approvals
Information on the currently available hazardous area rated versions
(FM, CSA, ATEX, etc.) is available on request from Hauser. All information
relevant to explosion protection is available in separate documentation.
By attaching the CE mark, Hauser confirms that the instrument fulfills all the
requirements of the relevant EC directives.
Flow meters with a nominal diameter smaller or equal to 1” (DN 25) are covered by
Art. 3(3) of the European directive 97/23/EG (Pressure Equipment Directive) and are
designed according to sound engineering practice. For larger nominal diameters,
optional approvals according to Cat. III are available when required (depends on the
fluid and process pressure).
The flow device has successfully passed all the test procedures carried out and is
certified and registered by the PNO (PROFIBUS User Organization). The device thus
meets all the requirements of the following specifications:
•
Certified to PROFIBUS-PA, profile version 3.0 (device certification number on
request)
•
The device can also be operated with certified devices of other manufacturers
(interoperability)
The flow device has successfully passed all the test procedures carried out and is
certified and registered by the Fieldbus FOUNDATION. The device thus meets all the
requirements of the following specifications:
•
Certified to FOUNDATION Fieldbus Specification
•
The device meets all the specifications of the FOUNDATION Fieldbus H1
•
Interoperability Test Kit (ITK), revision status 4.0 (device certification number on
request)
•
The device can also be operated with certified devices of other manufacturers
•
Physical Layer Conformance Test of the Fieldbus FOUNDATION
CE mark
Pressure equipment directive
PROFIBUS-DP/PA certification
FOUNDATION Fieldbus certification
EN 60529:
Degrees of protection by housing (IP Code)
EN 61010:
Protection Measures for Electrical Equipment for Measurement, Control, Regulation
and Laboratory Procedures
EN 61326/A1 (IEC 1326):
Electromagnetic compatibility (EMC requirements)
NAMUR 21:
Electromagnetic compatibility (EMC) of industrial process and laboratory control
equipment
NAMUR 43:
Standarization of the signal level for the breakdown information of digital transmitters
with analog output signals
Other standards, guidelines
