Commissioning
Oxymax W COS61
20
Hauser
6
Commissioning
6.1
Function check
Before first commissioning, check if:
• the sensor is correctly installed
• the electrical connection is correct.
If using an assembly with automatic cleaning, check the correct water connection at the assembly
rinse connection.
#
Warning!
Danger of medium leaking off
Before applying compressed air to an assembly with cleaning facility, make sure the connections are
correctly fitted. Otherwise, the assembly may not be insert into the process.
6.2
Calibration
The sensor is calibrated at the factory. A new calibration is only needed in special situations.
