Endress+Hauser Nivotester FTR525, Руководство по эксплуатации, Страница: 37 / 68

Nivotester FTR525
Hauser 37
Commissioning
8.4.2.16 Switch-off point switching output 2
Application
2000
→ Switching outputs
2400
→ Switching output 2
2420
→ Switch-off point output 2
2423
In this function the switching point of switching output 2, below which the switching
output is deactivated, is defined (function 2413 → 35).
8.4.2.17 Switch-on delay switching output 2
Application
2000
→ Switching outputs
2400
→ Switching output 2
2420
→ Switch-on delay output 2
2424
This function can be used to define a switch-on delay T
ON
for switching output 1 (function
2414 → 36).
8.4.2.18 Switch-off delay switching output 2
Application
2000
→ Switching outputs
2400
→ Switching output 2
2420
→ Switch-off delay output 2
2425
This function can be used to define a switch-off delay T
OFF
for switching output 1 (function
2415 → 36).
8�4�3 Adjustments to the display
The following functions can be used to configure settings for the display such as the
display mode and the language.
8�4�3�1 Tag
System
3000
→
Management
3100
→
Device management
3110
→
Tag
3111
This function can be used to enter the name for the measuring point (Tag). This name is
displayed in the measured value display depending on the selected display mode.
Options: 16-character free text input (→  25).
8�4�3�2 Language
System
3000
→
Display
3500
→
Language
3510
This function is used to select the language for the FTR525.
Options: "English", "German"
Other languages are available on request; these will replace the "German" language option.
8�4�3�3 Display mode
System
3000
→
Display
3500
→
Display mode
3520
This function is used to select the display mode that defines how the measured values of
the maximum of two measuring channels are displayed.
Options: "% limit (1M)", "Bargraph limit (1M)", "Tag limit (1M)", "% motion (2M)" *,
"Bargraph motion (2M)" *, "Tag motion (2M)" *, "Bargraph alternat. (1M/2M)" *,
"Tag alternating (1M/2M)" *