Endress+Hauser Nanomass Gas Density, Руководство по эксплуатации

Страница: 52 / 92

Operation Nanomass Gas Density
52 Hauser
6. Select the file where the real-time measuring data will be saved. You can choose from
the following options:
– Select "Create new file" to save measuring data in a new file.
– Select "Extend existing file" to insert measuring data into an existing file.
– Select "Overwrite existing file" to overwrite an existing file with measuring data.
7. Press the "Select" button.
 A window opens where you can select where the file should be saved.
8. Select the desired storage location. You can choose from the following options:
– If you selected "Create new file" previously, select the desired storage location for the
new file.
– If you selected "Extend existing file" previously, select the existing file to which
measuring data are to be added.
– If you selected "Overwrite existing file" previously, select the existing file which should
be overwritten.
9. Press the "Create file" button to confirm your choice.
 The selected storage location is displayed in the "Record Data" window.
10. If necessary, enter a preferred comment for the file header in the "Comment header"
input box.
11. If necessary, enter a preferred comment for every line of measured data in the file in the
"Comment each" input box.
12. Press the "Start" button to retrieve data from the internal memory and start saving the
data to a file. When the message "Meter will not be usable during download process"
appears, click "OK" to confirm.
 A new window "Download deep memory v2.015.vi" appears during the saving
process.
 Measuring data are written to the selected file.
11.5.3 Stopping saving
‣
Press the "Abort" button in the "Download deep memory v2.015.vi" window.
 The device stops saving the measuring data.
11.6 Adapting the measuring device to the process
conditions
See also:
• Configuring the measuring device (
→  36)
• Advanced settings ( →  41)