Endress+Hauser MODBUS RS485 Скачать руководство пользователя страница 84

Страница: 84 / 92

Technical data

LPGmass Modbus RS485

Hauser

Modbus RS485

A0030216

Service interface (CDI) of measuring device

Commubox FXA291

Computer with "FieldCare" operating tool with COM DTM "CDI Communication FXA291"

Languages

Can be operated in the following languages:

Via "FieldCare" operating tool: English, German

16.12 Certificates and approvals

CE mark

The measuring system is in conformity with the statutory requirements of the applicable

EU Directives. These are listed in the corresponding EU Declaration of Conformity along

with the standards applied.
Hauser confirms successful testing of the device by affixing to it the CE mark.

C-Tick symbol

The measuring system meets the EMC requirements of the "Australian Communications

and Media Authority (ACMA)".

Ex approval

The devices are certified for use in hazardous areas and the relevant safety instructions are

provided in the separate "Safety Instructions" (XA) document. Reference is made to this

document on the nameplate.

Modbus RS485 certification

The measuring device meets all the requirements of the MODBUS/TCP conformity test and

has the "MODBUS/TCP Conformance Test Policy, Version 2.0". The measuring device has

successfully passed all the test procedures carried out.

Measuring instrument

approval

The measuring device is (optionally) approved as a gas meter (MI-002) or component in

measuring systems (MI-005) in service subject to legal metrological control in accordance

with the European Measuring Instruments Directive 2014/32/EU (MID).
The measuring device is qualified to OIML R117 and has an OIML Certificate of

Conformity (optional).

16.13 Accessories

Overview of accessories available for order →  73

Содержание MODBUS RS485





























































































Результаты поиска

Содержание MODBUS RS485

Отзывы:

Похожие инструкции для MODBUS RS485

Бренды по названию

Популярные бренды

Endress+Hauser MODBUS RS485, Руководство по эксплуатации

Результаты поиска

Содержание MODBUS RS485

Отзывы:

Похожие инструкции для MODBUS RS485

Бренды по названию

Популярные бренды