Endress+Hauser MODBUS RS485, Руководство по эксплуатации

Страница: 51 / 92

LPGmass Modbus RS485 Commissioning
Hauser 51
Parameter overview with brief description
Parameter Prerequisite Description Selection Factory setting
Assign process variable – Select process variable for
totalizer. • Off
• Mass flow
• Volume flow
• Corrected volume
flow
Mass flow
Mass unit The Mass flow option is
selected in the Assign process
variable parameter (→  51)
of the Totalizer 1 to n
submenu.
Select mass unit. Unit choose list Country-specific:
• kg
• lb
Volume unit The Volume flow option is
selected in the Assign process
variable parameter (→  51)
of the Totalizer 1 to n
submenu.
Select volume unit. Unit choose list Country-specific:
• l
• gal (us)
Corrected volume unit The Corrected volume flow
option is selected in the
Assign process variable
parameter (→  51) of the
Totalizer 1 to n submenu.
Select corrected volume unit. Unit choose list Country-specific:
• Nl
• Sft³
10.5.4 Using parameters for device administration
The Administration submenu systematically guides the user through all the parameters
that can be used for device administration purposes.
Navigation
"Setup" menu → Advanced setup → Administration
‣
Administration
Device reset →  51
Parameter overview with brief description
Parameter Description Selection Factory setting
Device reset Reset the device configuration - either
entirely or in part - to a defined state. • Cancel
• To fieldbus defaults
*
• To delivery settings
• Restart device
Cancel
* Visibility depends on communication
10.6 Simulation
The Simulation submenu enables you to simulate, without a real flow situation, various
process variables in the process and the device alarm mode and to verify downstream
signal chains (switching valves or closed-control loops).