Endress+Hauser Memosens COS81D, Руководство по эксплуатации, Страница: 26 / 48

Commissioning Memosens COS81D
26 Hauser
8 Commissioning
Prior to initial commissioning, ensure that:
• The sensor is correctly installed
• The electrical connection is correct
If using an assembly with automatic cleaning function:
‣
Check that the cleaning medium (water or air, for example) is connected correctly.
L
WARNING
Escaping process medium
Risk of injury from high pressure, high temperatures or chemical hazards!
‣
Before applying pressure to an assembly with cleaning system, ensure that the system
has been connected correctly.
‣
If you cannot reliably establish the correct connection, do not install the assembly in
the process.
1. At the transmitter, enter all the settings specific to the parameters and measuring
point. These include the air pressure during calibration and measurement or the
salinity, for instance.
2. Check whether a calibration/adjustment is necessary.
The oxygen measuring point is then ready to measure.
Following commissioning, the sensor must be serviced at regular intervals, as only
then can reliable measurement be guaranteed.
Operating Instructions for the transmitter used, such as BA01245C if using the
Liquiline CM44x or CM44xR.