Identification
TMT180
6
Hauser
2
Identification
2.1
Unit identification
2.1.1
Legend plate
Compare the legend plates on the head transmitter with the following figures:
Fig. 1:
Example: Head transmitter legend plate
Fig. 2:
Order code with configuration (example) - K = Standard model, North America region
CE Mark, declaration of conformity
4
The devices are designed to meet state-of-the-art safety requirements, have been tested, and left the
factory in a condition in which they are safe to operate. The devices comply with the applicable
standards and regulations in accordance with IEC61010 "Protection Measures for Electrical
Equipment for Measurement, Control, Regulation and Laboratory Procedures" and with the EMC
requirements of IEC61326.The measuring system described in these Operating Instructions thus
complies with the statutory requirements of the EC Directives. The manufacturer confirms
successful testing of the device by affixing to it the CE mark.
UL recognized component to UL 3111-1
â
CSA GP approved
GL German Lloyd marine approval
Ó
GL Type Approval for temperature measurements in hazardous locations on GL Classed Vessels,
Marine and Offshore Installations.