Endress+Hauser iTEMP Pt TMT180, Руководство по эксплуатации, Страница: 21 / 24

TMT180 Technical Data
Hauser 21
10.0.8 Mechanical construction
Design, dimensions
Fig. 9: Dimensions of the head transmitter in inches (mm)
Weight approx. 1.4 oz (40 g)
Material • Housing: PC
• Potting: PUR
Terminals • Cable up to max. 16 AWG (secure screws)
• or 16 AWG with wire end ferrules
10.0.9 Human interface
Display elements No display elements are present directly on the temperature transmitter.
The measured value display can be called up using the PC configuration software ReadWin
®
2000.
Operating elements No operating elements are present directly on the transmitter to prevent from manipulation. The
device parameters of the head transmitter are configured using the PC operating software
ReadWin
®
2000.
Remote operation Configuration set
Configuration kit TMT180A-VM or TXU10, configurable on PC software program ReadWin
®
2000.
Starting from version R2.00.00 of the TMT180A the temperature head transmitter is configurable
without voltage supply.
Interface
PC interface connection cable TTL-/-RS232 or USB with plug.
Configurable parameters
Sensor type and connection type Pt100, engineering units (°C/°F), measurement range, cable
resistance compensation on 2 wire connection, fault conditioning, output signal (4 to 20 mA/20 to
4 mA), offset, measurement point identification (8 characters), output simulation