background image

Proline 400 HART

Operation options

Hauser

29

Functions

Meaning

Device status

Displays the diagnostic messages currently pending, listed in order of priority

Data management

Data exchange between PC and measuring device:
• Device configuration:

• Load settings from the device

(XML format, save configuration)

• Save settings to the device

(XML format, restore configuration)

• Logbook - Export Event logbook (.csv file)
• Documents - Export documents:

• Export backup data record

(.csv file, create documentation of the measuring point configuration)

• Verification report

(PDF file, only available with the "Heartbeat Verification" application package)

Network
configuration

Configuration and checking of all the parameters required for establishing the connection to the
measuring device:
• Network settings (e.g. IP address, MAC address)
• Device information (e.g. serial number, firmware version)

Logout

End the operation and call up the login page

Navigation area

If a function is selected in the function bar, the submenus of the function open in the

navigation area. The user can now navigate through the menu structure.

Working area

Depending on the selected function and the related submenus, various actions can be

performed in this area:

• Configuring parameters

• Reading measured values

• Calling up help text

• Starting an upload/download

6.3.6  

Disabling the Web server

The Web server of the measuring device can be switched on and off as required using the

Web server functionality

 parameter.

Navigation

"Expert" menu → Communication → Web server

Parameter overview with brief description

Parameter

Description

Selection

Web server functionality

Switch the Web server on and off.

• Off
• On

Содержание HART Proline 400





































Отзывы: