Endress+Hauser Gammapilot FMG50, Краткое руководство по эксплуатации

Страница: 10 / 40

Mounting Gammapilot M FMG50
10 Hauser
2.8 Product safety
This measuring device is designed in accordance with good engineering practice to meet state-
of-the-art safety requirements, has been tested, and left the factory in a condition in which it
is safe to operate. It meets general safety standards and legal requirements.
2.8.1 CE mark
The measuring system meets the legal requirements of the applicable EU Directives. These are
listed in the corresponding EU Declaration of Conformity along with the standards applied.
Hauser confirms successful testing of the device by affixing to it the CE mark.
2.8.2 EAC conformity
The measuring system meets the legal requirements of the applicable EAC guidelines. These
are listed in the corresponding EAC Declaration of Conformity together with the standards
applied.
Hauser confirms successful testing of the device by affixing to it the EAC mark.
3 Mounting
3.1 Incoming acceptance, product identification, transport, storage
3.1.1 Incoming acceptance
Check the following during incoming acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the nameplate data match the ordering information on the delivery note?
 If required (see nameplate): Are the safety instructions (XA) provided?
If one of these conditions is not met, please contact the manufacturer's sales office.
3.1.2 Product identification
The following options are available for the identification of the measuring device:
• Nameplate specifications
• Extended order code with breakdown of the device features on the delivery note
‣
Enter the serial number from the nameplates into W@M Device Viewer
( www.endress.com/deviceviewer )
 All the information about the measuring device and the scope of the associated
Technical Documentation are displayed.