Endress+Hauser Gammapilot FMG50, Краткое руководство по эксплуатации

Страница: 29 / 40

Gammapilot M FMG50 Commissioning
Hauser 29
2. Open the device in FieldCare or DeviceCare.
 The dashboard (homepage) of the device is displayed:
Click "System -> Device management"
3. Reset the device in the "Device reset" parameter
The following types of reset can be selected:
• Restart device
A soft reset is performed here. The device software performs all the diagnostics that would
also be performed by a hard reset by switching the device on/off.
• Reset to factory default
It is always advisable to reset the customer parameters if you want to use a device with an
unknown history, or if the operating mode is changed. When a reset is performed, all
customer parameters are reset to the factory default values
• Optional: reset to customer settings
If the device was ordered with a customized configuration, a reset restores these customer
settings configured at the factory.
A reset can also be performed on site via the operating keys (see the "Commissioning via
onsite operation" section).
6 Commissioning
6.1 Post-installation and post-connection check
Perform the post-installation check and the post-connection check for the FMG50 prior to
commissioning the measuring point.