Endress+Hauser Deltapilot S FMB70, Руководство по функциональной безопасности

Страница: 22 / 36

Deltapilot S
22 Hauser
DAMPING VALUE (855) For displaying and querying the value entered for the DAMPING VALUE parameter
(BASIC SETUP or QUICK SETUP group).
Options:
• Valid: Select this option if the value entered and desired is displayed.
• Not valid: Select this option if a value that was not entered or desired is displayed.
In this case, operation of the device in the safe measuring mode is not possible.
!
Note!
Changing the "Damping" DIP switch on the electronic insert does not have any effect on
the damping time when operation is locked. A change only takes effect once operation
has been unlocked.
CONF. PASSWORD (856) Once the safety-related parameters have been successfully interrogated, the password
" 7452" must be entered again via the CONF. PASSWORD parameter. Afterwards, the
device is locked for the safe measuring mode. The SAFETY LOCKSTATE parameter
displays the status "Locked".
MEASURING MODE = pressure
Parameter name Description