Endress+Hauser CleanFit CPA 451, Руководство по эксплуатации

Страница: 7 / 28

CleanFit CPA 451 Installation
Hauser 7
3 Installation
3.1 Incoming acceptance, transport, storage
•
Make sure the packaging is undamaged!
Inform the supplier about damage to the packaging.
Keep the damaged packaging until the matter has been settled.
•
Make sure the contents are undamaged!
Inform the supplier about damage to the delivery contents.
Keep the damaged products until the matter has been settled.
•
Check that the scope of delivery is complete and agrees with your order and the
shipping documents.
•
The packaging material used to store or to transport the product must provide shock
protection and humidity protection. The original packaging offers the best protection.
Also, keep to the approved ambient conditions (see "Technical data").
•
If you have any questions, please contact your supplier or your Hauser
sales centre responsible (see back page of these Operating Instructions).
3.2 Installation conditions
3.2.1 Dimensions
C07-CUA451xx-06-07-en-003.eps
Fig. 2: Assembly with welding neck (short
lift)
* Dimensions depend on sensor, see
below
C07-CUA451xx-06-07-00-en-002.eps
Fig. 3: Assembly with flange connection
(long lift)
* Dimensions depend on sensor, see
below
C07-CUA451xx-06-07-00-en-001.eps
Fig. 4: Assembly in service position
** Assembly version with short lift
(see product structure)
*** There must be additional space of 350 mm (13.78") for sensor installation!
*
32
/
1.26
227
/
8.94
53
/
2.09
85
/
3.35
Ø 49.5/
Ø 1.95
mm /
inch
1/
0.04
*
32
/
1.26
105
/
4.13
227
/
8.94
53
/
2.09
85
/
3.35
Ø 49.5/
Ø 1.95 mm /
inch
105 4.13
100
3.94
191**
/
296
7.52**
/
11.65
443**
/
548
17.44**
/
21.57
+
350
/
13.78*
**
mm
inch
* Dimension acc. to sensor type:
CPF 81-xx2:
6 mm (0.24")
CPF 81/82-xx1: 17 mm (0.67")