Endress+Hauser CleanFit CPA 451, Руководство по эксплуатации

Страница: 23 / 28

CleanFit CPA 451 Trouble-shooting
Hauser 23
7.4 Return
If the assembly has to be repaired, please return it cleaned to the Hauser
sales centre responsible.
Please use the original packaging, if possible.
Please enclose the completed Dangerous Goods sheet (copy the second last page of
these Operating Instructions) with the packaging and also the shipping documents.
No repair without completed Dangerous Goods sheet!
7.5 Disposal
You have to separately dispose of ball valve, sensor holder and other components
according to their material.
Please observe local regulations.
Item no. Designation and contents Order number
Spare parts kit
2 Ball handle with bolts
2 of each 51513168
3 Sensor holder for CPF 81
For assembly version:
– long, immersion depth approx. 270 mm (10.63 inch)
51513161
4 Outer sleeve
For assembly version:
– long, immersion depth approx. 270 mm (10.63 inch)
51513156
5, 6, 11,
14 Kit:
– Bracket (11), 5 units
– Allen screws M8 x 20 (6), 10 units
– Stop bolt lock (14), 2 units
– Grub screws (7), 10 units 51513169
7, 16 Ball valve (16):
without process connection, with G2 internal thread and lower section of
bayonet joint (7) 51513159
7, 16, 17
Ball valve (16):
with flange DN 50, welding adapter (17) and lower section of bayonet joint (7) 51513154
Ball valve (16):
with flange ANSI 2", welding adapter (17), lower section of bayonet joint (7) 51513155
8 Lubricator nipple H1 M6x1 51514843
9 Ball valve for rinse chamber
as rinse connection or ventilation, hose connection OD 9 51512982
10 Locking pin 3.2x16 (0.13x0.63 inch) 51514845
12 Sensor holder for CPF 81
For assembly version:
– short, immersion depth approx. 170 mm (6.69 inch)
51513160
13 Outer sleeve
For assembly version:
– short, immersion depth approx. 170 mm (6.69 inch)
51513158