Endless Summer ES5000COMM страница 9 Скачать руководство пользователя

Страница: 9 / 24

Need help? 1.800.762.1142

Do not return to place of purchase.

Replacement Parts

parts.BlueRhino.com /

1.800.762.1142

8. Check heater immediately if any of the following conditions exist:

a. You smell gas in conjunction with extreme yellow tipping of burner flames.
b. Heater does not reach proper temperature.

Note: At temperatures less than 40ºF, heat output will be reduced.

c. Heater’s glow is excessively uneven.
d. Burner makes popping noises during use.

Note: A “poof” sound is normal as the last of the LP gas is burned.

9.  Carbon deposits may create a fire hazard. Keep dome and emitter clean at all times.
10.  Do NOT clean heater with combustible or corrosive cleaners. Use warm, soapy water.
11.  Do NOT paint engine, engine access panel or dome.
12.  After a period of storage and/or non use, check for leaks, burner obstructions and

inspect for any abrasion, wear or cuts to the hose.

13. Check under the dome and engine area periodically for any obstructions such as

spiderwebs, bird nests, etc.

Before Each Use:

1. Keep the heater area clean and free from any combustible materials, gasoline, and other

flammable vapors and liquids.

2.  Do NOT obstruct the flow of the combustion of LP gas and the ventilation of air.
3.  Keep the ventilation opening(s) of the LP gas tank area free and clear from debris.
4.  Visually check the burner flames to make sure your heater is working properly.
5.  See sections below for proper cleaning instructions.
6.  Check for obstructions of airflow to the burners. Spiders, insects and webs can clog the

burner/venturi tube. A clogged burner tube can lead to a fire.

Cleaning Surfaces

1.  Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water.
2.  For stubborn surfaces, use a citrus-based degreaser and a nylon scrubbing brush.
3.  Rinse clean with water.
4.  Allow to air dry.
Note: While cleaning your unit, be sure to keep the area around the burner and pilot assembly
dry at all times.

Do NOT submerge the control valve assembly. If the gas control is

submerged in water, do NOT use it. It must be replaced.

Maintenance

To enjoy years of outstanding performance from your heater, make sure you perform the
following maintenance activities on a regular basis:
1.  Keep exterior surfaces clean.
2.  Perform routine maintenance.
3.  Air flow must be unobstructed. Keep controls, burner, and circulating air passageways

clean. Signs of possible blockage include:
•  Gas odor with extreme yellow tipping of flame.
•  Heater does NOT reach the desired temperature.
•  Heater glow is excessively uneven.
•  Heater makes popping noises.

Note: In a salt-air environment (such as near an ocean), corrosion occurs more quickly than
normal. Frequently check for corroded areas and repair them promptly.

TIP

: Use high-quality automobile wax to help maintain the appearance of your heater. Apply to

exterior surfaces from the pole down.

Do NOT apply to emitter screen or domes.

Storage and Transporting

1.  Make sure control knob is in the “  OFF” position and LP gas tank valve is “CLOSED.”
2.  Disconnect LP gas tank per “Disconnecting LP Gas Tank” section.
3.  Clean all surfaces per “Cleaning Surfaces” section.
4.  Cover the patio heater with a patio heater cover to help protect from the weather and

build up in air passages.

WARNING: Wait until heater is cool before covering.

5. Store heater upright in an area sheltered from direct contact with inclement weather (such

as rain, sleet, hail, snow, dust, debris and high winds).

6. Place the protective cap cover on the LP tank and store the tank outdoors in a well

ventilated area out of direct sunlight.

Product Registration

For faster warranty service, register your product immediately at BlueRhino.com/warranty or by
calling 1.800.762.1142.

Replacement Parts

Replacement parts can be found at parts.BlueRhino.com or by calling 1.800.762.1142.

Limited Warranty

Blue Rhino Global Sourcing, Inc. (“Blue Rhino”) warrants to the original retail purchaser of this
product, and to no other person, that if this product is assembled, maintained, and operated
in accordance with the printed instructions accompanying it, then for a period of five (5) years
for the burners and one (1) year for all remaining parts from the date of purchase, all parts in
such product shall be free from defects in material and workmanship. Blue Rhino may require
reasonable proof of your date of purchase. Therefore, you should retain your sales slip or
invoice. This Limited Warranty shall be limited to the repair or replacement of parts, which prove
defective under normal use and service and which Blue Rhino shall determine in its reasonable
discretion upon examination to be defective. Before returning any parts, you should contact
Blue Rhino’s Customer Care Department using the contact information listed below. If Blue
Rhino confirms, after examination, a defect covered by this Limited Warranty in any returned
part, and if Blue Rhino approves the claim, Blue Rhino will replace such defective part without
charge. If you return defective parts, transportation charges must be prepaid by you. Blue Rhino
will return replacement parts to the original retail purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident,
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or
service by you or any third party, or failure to perform normal and routine maintenance on
the product as set out in this owner’s manual. In addition, the Limited Warranty does not cover
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage,
after purchase.
This Limited Warranty is in lieu of all other express warranties. Blue Rhino disclaims all
warranties for products that are purchased from sellers other than authorized retailers or
distributors, including the warranty of merchantability or the warranty of fitness for a particular
purpose. Blue Rhino ALSO DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Blue Rhino SHALL HAVE NO LIABILITY TO PURCHASER OR ANY THIRD
PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
Blue Rhino further disclaims any implied or express warranty of, and assumes no responsibility
for, defects in workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other
rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or
limitation of special, incidental or consequential damages, or limitations on how long a warranty
lasts, so the above exclusion and limitations may not apply to everyone.
Blue Rhino does not authorize any person or company to assume for it any other obligation
or liability in connection with the sale, installation, use, removal, return, or replacement of its
equipment, and no such representations are binding on Blue Rhino.
Blue Rhino Global Sourcing, Inc.
Winston-Salem, North Carolina 27105 USA
1.800.762.1142