3
Assembly instructions ECOLINE 5560/5570/5580 17-03-2009
Gas canister connection:
1. Attach the pressure regulator (1) to the gas cylinder.
2. Connect the hosing (4) to the connector on the pressure regulator
using the clamp (20) provided.
3. Connect the gas hose from the burner (5) to the gas hose from the regulator (4)
using the quick coupler (6) provided.
4. With the regulator valve (2) open, check that none of the connection points are
leaking gas. If there is no bubble formation, no leaks are present.
Never inspect for leaks when the heater is in use!
5. At this point the instruction manual supplied for the gas pressure regulator
should also be referred to.
The liquid gas canister should only be replaced in a well-ventilated room,
away from naked flames (candles, cigarettes, etc)!
GB
31 Hose clamp
2 Regulator valve
Fig. 2
6 Gas hose to regulator
1 Regulator
5560_5570_5580_Ecoline_DE_GB_FR_170309.indd 3
17.03.2009 13:35:36 Uhr
