50
Copyright ©
ŘŖŗŜ
by Endecotts Ltd.
1. Setting up
Setting Up
Electrical connections
x
Ensure that the voltage and frequency on the rating label, at the rear of the Air Sizer 200
correspond with the local electrical mains supply.
x
Connect the Air Sizer 200 to the power supply using the connection cable provided.
Do not connect to any other supply other than stated on the rating label,
otherwise electrical and mechanical components can be damaged.
Ambient temperature:
5°C to 40°C
If the ambient temperature is exceeded or drops below the specified value
the electrical and mechanical components may become damaged and the
performance data can change to an unknown degree.
Atmospheric humidity:
Maximum relative humidity 80% at temperatures up to 31°C,
with linear reduction down to 50% relative humidity at 40°C.
At high atmospheric humidity the electrical and mechanical components
may become damaged and the performance data can change to an
unknown degree.
x
Mains power connection
Mains power connection with integral line filter. Ensure the IEC connector
on the mains lead is pushed fully into the mains inlet at the rear of the machine.
x
Mains Connection Indication
If the power of the Air sizer 200 is switched “ON”, the display LED lights up.
x
Process Timer
The process timer is a digital 00:10-99:50 minute timer. Operating periods
are increased by pressing the “
ޔ
” button and decreased by pressing the “
ޕ
“ button.
QAQC LAB 589 Rappahannock Drive White Stone Va 22578 TEL (804) 318-3686
