Endeavour Tools ET8636, Инструкция по эксплуатации

Страница: 17 / 44

15
MEASUREMENT PROCEDURES
⑤
Choose testing mode with using
△
(UP
SCROLL) /
▽
(DOWN SCROLL) Keys and
press (ENTER) Key . In the case of
battery for the cars with charge controller
or idle reduction systems, choose "Charge
Controller / Idle Reduction". Otherwise
choose "Standard".
※
"Industrial Rating" screen in Page 16 is
displayed when choosing "Industry" at
Step
④
.
●
When choosing "JIS"
Select conformable JIS type with using
△
(UP
SCROLL) /
▽
(DOWN SCROLL) Keys and
press (ENTER) Key . Battery test starts.
⑦
The following screen is displayed depending on the selected standards.
Press (BACK) Key to go back to the
Battery Type Selection screen (Step
④
on Page 14).
Press
(BACK) Key
to go back to the Battery
Type Selection screen (Step
④
on Page 14).
Select JIS
Test Start
95D31 105E41
95E41 110D26
100E41 110E41
105D31 115D26
Testing Mode
▲▼
Standard
Charge Controller/
Idle Reduction
Testing Mode
▲▼
Charge Controller/
Idle Reduction
Hybrid Auxiliary
Which Test Mode?
Aging Test
Unused Battery Test
●
If you want to test the auxiliary battery for
hybrid car, choose "Hybrid Auxiliary" with
using
△
(UP SCROLL) /
▽
(DOWN SCROLL)
Keys
and press
(ENTER) Key
. "Select
JIS" screen in step
⑦
is displayed.
※
"Hybrid Auxiliary" cannot be selected when
choosing EN(DIN), SAE(BCI), CCA Input in
Step
④
on Page 14.
⑥
Select Test Mode.
Aging Test
：
Choose it for deterioration check.
Unused Battery Test
：
Choose it for condition check of the
unused battery
Press (BACK) Key to go back to the Battery
Type Selection screen (Step
④
on Page 14).