Endace DAG 5.2X Скачать руководство пользователя

Страница: 32 / 66

EDM01-33v1 DAG_7.5G4_Card_User_Guide

dagconfig options

dagconfig

is a software utility used to configure and display statistics.

By default all commands, unless otherwise defined, run on device 0 (

-d0

). Commands only

apply to one DAG card.
The following is a list options available in

dagconfig

. Not all options listed are applicable to

all cards.

Options:

Description

-1,--porta

Port A only (default all). Multi-port cards only.

-2,--portb

Port B only (default all). Multi-port cards only.

-3,--portc

Port C only (default all). Four-port cards only.

-4,--portd

Port D only (default all). Four-port cards only.

--porte to --portp

As above, for extra ports on the 3.7T DAG card.

-c,--concfg <conncfg>

Connection configuration. Used by the DAG 7.1S only.

-C,--counters

Outputs the counters. Verbosity levels from 0=(basic / default) to

3=(full).

-d,--device <device>

DAG device to use. Default is d0.

-e,--extended

Displays the current extended statistics (non boolean and image

dependant). Verbosity levels from 0=(basic / default) to 3=(full).

Note: Some images may not contain extended statistics.

-G,--getattribute <getattribute>

Gets individual attributes by attribute name. Use in conjunction with

the --porta or --portb options to get individual only multi-port cards.

-h,--help

Displays the MAN pages. The information displayed is dynamically

based on the DAG card and does not work correctly when there is no

DAG card in the system.

Note:

There are a few commands that display even though they are not

applicable.

-i,--interval <seconds>

Interval to repeat in seconds.

-m,--hmon

Outputs the hardware monitor information.

-n,--voltages

Outputs the DAG card voltage monitor information.

-S,--setattribute <setattribute>

Sets individual attributes by attribute name. Use in conjunction with

the --porta or --portb options to get individual only multi-port cards.

-s,--statistics

Outputs the statistics for the DAG card. Verbosity levels from 0=(basic

/ default) to 3=(full).

-T,--tree

Outputs the supported Configuration and Status attributes and

components with the description and name. Using the -v2 verbosity

level also outputs all components and attribute codes. Verbosity levels

from 0=(basic / default) to 3=(full).

-t,--txstats

Outputs the transmit statistics for the DAG card. Where applicable.

-u, --ucounters

Outputs the universal counters for the DAG card. Where applicable.

-v,--verbose <level>

Sets the verbosity level, from 0 (basic) to 3 (full).

-V,--version

Display the DAG card version information.

Note:

For cards with more than 2 ports you can select the required port using: -

(portnumber) or --(portletter).

Содержание DAG 5.2X



































































Результаты поиска

Содержание DAG 5.2X

Отзывы:

Похожие инструкции для DAG 5.2X

Бренды по названию

Популярные бренды

Endace DAG 5.2X, Руководство пользователя

Результаты поиска

Содержание DAG 5.2X

Отзывы:

Похожие инструкции для DAG 5.2X

Бренды по названию

Популярные бренды