manualshive.com logo in svg

END ARMATUREN DA2D3, Оригинальное руководство по эксплуатации, Страница: 26 / 40

Поделиться
Скачать
END ARMATUREN DA2D3 Скачать руководство пользователя страница 26

26 

http://www.end.de 

DG2D - 07/2016

Assembly Instructions

5.5.2 

  Electrical installation of a pilot valve

Turn out the screw from the plug and push up the plug from  the valve. Now open the 

plug.

By electrical installation of the pilot valve use only the prescribed cable type.

Remove the sheaths of the cable and remove the isolation of the leads. In case of leads with 

stranded conductors, provide the ends in each case with a wire end sleeve.

Lead the cable through the PG screw fitting.

Put the leads end into the terminals and tighten the screw. The correct joining you will see in the  

wiring diagram.

Take care that no bare lead stand out from the terminals thus preventing the danger of a shock 

or a short circuit.

Mount the plug .Take care that no lead will be squeezed. The cover of the body can be fixed with 

90° turn.

Screw up the PG screw fitting so firmly that the strain relief is effective and the cable feed-

through corresponds to the prescribed degree protection.

Put the plug onto the pilot valve and tighten the screw. Take care about the correct position of the 

plug contacts.

Fig. 5.8 - Mounting / Disassembly - Mounting of a pilot valve, pneumatically and electrical installation

sealing compound 

harden

Содержание DA2D3









































Отзывы:

Нет отзывов