manualshive.com logo in svg

END ARMATUREN DA2D3, Оригинальное руководство по эксплуатации, Страница: 24 / 40

Поделиться
Скачать
END ARMATUREN DA2D3 Скачать руководство пользователя страница 24

24 

http://www.end.de 

DG2D - 07/2016

5.4 

Connection of  the pilot medium

By choosing the pilot media observe the the specification in chapter

 10 „Technical data“.

 You have to screw a appropriate hose connector into the pilot port.

By using liquid sealing compounds take care that no surplus sealing compound will flow into the 

pilot cylinder.

Feeds the pilot hose with pressure after the time will has gone by the manufacturer prescribes to  

harden the sealing compound. 

Connect the pilot medium hose with the hose connector. Use only the correct hose for your appli-

cation.

Fasten the hose into the hose connector.

By laying the hose take care, that the hose will not be creased, squeezed or sheared or that the 

hose will be laid over edges. Also take care that there will be no pressure or traction on the hose.

Lay the hoses to their starting positions as appropriate, in conduits or cable ducts.

Check the tightness at all connections.

Assembly Instructions

Fig. 5.6 - Mounting / disassembly - Connection of the pilot medium

Sealing compound 

harden!

Содержание DA2D3









































Отзывы:

Нет отзывов