Disk- HD Configuration
To format your hard disk in EXT3 format:
1.
Mark the “Swap enable” check box or leave it blank. The Swap function allows
the device to transform the HD space as virtual memory while there is not
sufficient virtual memory for performing efficient operation.
Note:
z
While the HD is formatted with Swap enabled, a 512 MB partition is
reserved for operating the Swap function.
z
If you enable the SWAP function for the device, the system allowed the
maximum 32 concurrently connected users. If not, the system allowed
5 users to be connected at the same time.
2.
Click “Yes” to execute HD Format.
Caution:
All files within the hard disk will be erased while HD Format is executed!!
Note:
1.
The Hard Disk will be formatted as EXT3 format.
2.
The HD Format function supports the hard disk that connected to the
device with IDE connector only. To format your hard disk in USB interface,
see “To Format Your USB Storage”
42
