9
www.encore-usa.com
Parts
Description
LAN Ports (1 – 4)
Use an Ethernet cable to connect each port to a computer on
your Local Area Network (LAN).
WAN Port
Use an Ethernet cable to connect this port to your WAN
router.
Power Switch
Turn on or off the device
Antenna
Connector
Interface for the antennas.
LAN LED
This LED will light up once an Ethernet cable is connected to
one of the LAN ports.
WAN LED
This LED will light up once an Ethernet cable is connected to
WAN (Internet) port.
WLAN LED
This LED will light up once the RF (wireless LAN) feature is
enabled
Power LED
This LED will light up once the power cable is connected to
the DC connector.
WPS button
1- 5 seconds: Activates WPS
6-10 seconds: System Reboot
11+ seconds: Reset to factory default
1.5 System Requirements
The following are the minimum system requirements in order to configure the device.
A computer with an Ethernet interface
Operating system that supports HTTP web-browser
1.6 Applications
The wireless LAN products are easy to install and highly efficient. The following list
describes some of the many applications made possible through the power and flexibility
of wireless LANs: