22
www.encore-usa.com
PPPoE (Point-to-Point Protocol over Ethernet)
The WAN interface can be configured as PPPoE. This type of connection is usually used for
a DSL service and requires a username and password to connect.
Address Mode
: PPPoE can be used with a dynamic or static IP address. If you select
the
Dynamic IP
radio button, then the IIP address in the next field is not required.
However, if you select the
Static IP
radio button, then the IP address in the next field is
required.
IP Address
: Enter the IP address if the Static IP is selected.
User Name
: Enter the username which is provided by your ISP.
Password:
Enter the password which is provided by your ISP.
Verify Password:
Enter the password again for verification.
Service Name:
This is optional. Enter the ISP name.
Reconnect Mode:
o
Keep Connection: will stay connected to the Internet.
o
Automatic Connect: automatically connects to the Internet when an application needs
it, and drops the connection after the designated idle time period.
o
Manual Connect: manually connect and disconnect to the internet by the user.