Encore E 3, Руководство по установке

Страница: 4 / 13

E3 IN REV. A 4
Main Power Connector
RED / WHITE: PARKING LIGHT RELAY INPUT
WHITE: PARKING LIGHT OUTPUT
BLACK : MAIN SYSTEMS GROUND
BROWN : POSITIVE SIREN OUTPUT
RED : FUSED 12 VOLT (+) BATTERY POWER
3 PIN, DOOR LOCK CONNECTOR
1. Blue
Wire
3. Green
Wire
( - ) Lock Pulse
( + ) Unlock Pulse
( - ) Unlock Pulse
(+) Lock Pulse
8 - Pin Accessory Connector
-
GRAY WIRE / CHANNEL 3 NEGATIVE TRUNK OUTPUT
-
ORANGE :STARTER INTERRUPT O/P RELAY REQUIRED
-
YELLOW / IGNITION INPUT (+)
- GREEN / (-) DOOR TRIGGER INPUT
- BLUE / (-) INSTANT TRIGGER INPUT ( HOOD, TRUNK)
-
VIOLET / (+) DOOR TRIGGER INPUT
-
WHITE / DOME LIGHT (OR CH#4 O/P) RELAY REQUIRED
-
BROWN/ WHITE / (-) HORN OUTPUT.
WIRING
Keep wiring away from moving engine parts, exhaust pipes and high-tension cable. Be sure to tape wires
that pass through holes on the firewall to prevent fraying.
CAUTION
: Do not connect the wire harness to the control module until all wiring to vehicle is complete.
2 PIN WHITE CONNECTOR (THE LED STATUS INDICATOR):
The led indicator status should be mounted in a highly visible area such as top of the dashboard, on top