E3 IN REV. A
2
Precautions: Please read carefully
This Remote Starter with Alarm and Keyless Entry System has been designed to be installed BY PROFESSIONAL
INSTALLERS on fuel-injected vehicles with an automatic transmission ONLY.
Never install this remote starter on a manual transmission vehicle.
This system must be installed and wired through a safety switch so it will not start in any forward or
reverse gear.
Once you install this system, you must verify that the vehicle will not start in any forward or reverse
gear, regardless of the type of vehicle.
Read the operation manual for operating.
Do not install any component near the brake, gas pedal or steering linkage.
Some vehicles have a factory installed transponder immobilizer system that can severely complicate
the installation. There is a possibility that this system cannot be installed on some immobilizer-equipped
vehicles.
Most vehicles have an SRS air bag system. Use extreme care and do not probe any wires of the SRS
system.
Disconnect the car battery before beginning work on the vehicle.
Check behind panels before drilling any holes. Ensure that no wiring harness or other components
are located behind the panels that would otherwise be damaged.
Do not use conventional crimp lock, bullet on any wiring. Poor wiring, i.e. taped joints will possibly
introduce unreliability into the alarm system and may result in false alarms or incorrect operation. We
suggest soldering all connection points.
Install the wiring neatly under carpets or behind trim to prevent possible damage to wires.
FOR AUTHORIZED DEALER TECHNICAL SUPPORT, PLEASE CALL
Toll Free: (855) GO-ENCORE : 8:00 am TO 5:00 pm PST.
WARNINGS:
As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of.
Содержание E 3
Страница 3: ...E3 IN REV A 3 INSTALLATION DIAGRAM ...
Страница 13: ...E3 IN REV A 13 Notes ...