Encore Networks BANDIT III, Быстрый старт

Страница: 1 / 16

encor etworks
TM
e n
!
•
For information on trademarks, safety, limitations
of liability, and similar topics, see
Notices .
Go to
Table of
Contents
Go to
Top
Doc
Go to
List of
All Docs
BANDIT III Hardware Description
1
st
of 3 QuickStart Guides for the BANDIT III
his chapter provides information on the hardware for the BANDIT III™. The BANDIT III
is a high-end model in the BANDIT™ products, optimized for utility applications and
protocols.
The BANDIT III complies with the European Union's directive on restriction of hazardous
substances (ROHS). This directive places strict controls on pollutants, including the elimination
of lead in the manufacturing process.
The BANDIT III is available in a commercial chassis, with a standard hard plastic cover, or an
environmentally hardened chassis, with a metal cover. Hardened construction allows the
BANDIT III to operate over wide temperature ranges at remote sites that do not use
environmental control.
The BANDIT III, like all products in the BANDIT family, uses the ELIOS™ operating system.
In addition to its support of virtual private networks (VPNs) and its support of legacy protocols,
the BANDIT III can handle all variants of the Supervisory Control and Data Acquisition (SCADA)
protocol, both bit- and byte-oriented, with strong encryption of all traffic and complete remote
management capabilities after a simple plug-and-play installation.
Figure 1-1 shows the outer shell of a BANDIT III chassis. (Also see Section A.3.1, Physical
Specifications .)
Figure 1-1. BANDIT III Chassis
See the following sections:
• The BANDIT III Chassis
• Status LEDs
T
Home Module: BANDIT III Reference
Document 1
Version A.3, July 2014
© 2014 Encore Networks, Inc.
All rights reserved.
Top Doc
Doc List
Module TOC