Page
6 of 21
Receiver Control
COMMUNICATION SETTINGS
To gain access to the Receiver, you can connect to it over an RS-232 connection
using the following comms settings:
Baud Rate
9600
Data Bits
8
Parity
None
Stop Bit
1
Flow Control None
Device Type DTE
Note
: null modem cable required
You can also connect over IP to port 5004 on your Receiver:
Once connected, you will be challenged to provide a username and password which
by default are as follows:
Username
engineer
Password
iptv250
PLEASE NOTE!
You are limited to a maximum of five concurrent telnet sessions. Once a sixth
connection is made, the first connection will be terminated.
