Page
18 of 21
Screen Control Responses and Errors
Should an error occur during command execution, the Receiver will return an error.
RESPONSES
In the event another request is made to enter serial communications mode, your
serial connection will be dropped immediately.
You will receive the response as follows:
Kicked
Although this indicates you have been dropped from serial communications, be
aware that your IP connection is not disconnected and will remain open.
ERROR CODES
The message indicates that an error has occurred as well as the error type. Error
codes are presented in the form of:
ERRORxx: text
where
<xx>
is a two digit decimal error ID code, and <
text
> is a plain text
description of the error.
Current error codes:
ERROR99: Unspecified Error
Error opening serial port:
No serial device found (matching /dev/ttyUSB*)
PLEASE NOTE!
Confirm that the cable is correctly inserted and that you are communicating with the
correct Receiver unit. Failing this, test again with a different cable.
