Page
15 of 21
Screen Control
The IPTV Receiver can be used to IP-enable any RS-232 device such as the
television screen it is attached to. This allows central monitoring, control and
maintenance of all screens, projectors, and so on.
CONNECTION SETTINGS
To gain access to RS-232 communications, Telnet to port 5004 on your Receiver.
Once connected, you will be challenged to provide a username and password which
by default are as follows:
Username
engineer
Password
iptv250
After logging in, run the STBSERIAL command to begin serial communications.
PLEASE NOTE!
You are limited to a maximum of five concurrent telnet sessions. Once a sixth
connection is made, the first connection will be terminated.
