www.
en
c
loscreens
.com
ASSEMBLY
INSTRUCTIONS
EC18012
/
EC18013
6
STEP 2.2
1
1.
Insert (1) Bottom Rail
(E)
until the bottom of the middle post hits the bottom
rail wall. Do not install the screws yet.
2.
Insert (2) Ground Stakes
(F)
up the post until the pre-drilled holes in the
anchor and the side of the posts align.
3.
Drive (4) total 3/4" Self-Drilling Stainless Steel Screws
(H)
in to the pre-drilled
holes to secure the anchors.
STEP 2.3
2
3
E
F
Align
1. (Optional)
Ensure the pre-drilled holes in the bottom rail and the post are aligned and pre-drill (4)
total holes in the ground stakes using the included 1/8" Steel Drill Bit
(J)
.
2.
Drive (4) total 3/4" self-drilling stainless steel screws through the pre-drilled holes in the bottom rail.
3.
Insert (2) Rail End Caps
(G)
over the ends of the top and bottom rail.
J
G
H
