www.
en
c
loscreens
.com
ASSEMBLY
INSTRUCTIONS
EC18012
/
EC18013
9
3
STEP 4.3
Optional in hard ground:
If your ground is too hard, or you have more than 3 or 4
panels to install, please consider these options:
1.
Use a 13/4” diameter auger bit (commonly used for planting tulips) as illustrated
($15-$20 on Amazon.com).
2.
Drill a hole about 12” to 16” deep at the desired location, and fill the holes
with water as illustrated.
3.
Push the panel posts into the holes.
1.
If your ground is very hard, you may need to dig an 8" by 14" deep hole to accomodate one
post from each panel.
2.
Level the screen as necessary, backfill excavated dirt, and tamp if needed.
STEP 5.3
STEP 4.4
11
2
11
2
