Enclave Audio CINEHOME HD SERIES, Руководство пользователя

Страница: 11 / 16

p. 10
Noise Sequence Test
You can also test each speaker for audio individually by following the below:
Note: Enter MENU/Speaker Settings to find this option.
The Noise Sequence generator can be used to confirm successful placement and pairing
of the Enclave speakers .
A static white noise will be produced by each speaker individually in the system in a
rotating fashion.
The Noise sequence use the following rotation:
Left Front, Right Front, Left Surround , Right Surround , Center , Subwoofer.
You can stop this test by depressing any key on the remote control or Enclave Smart
Center keypad.
2. I am playing a DVD or Blu-ray disc that has surround sound, but I am only hearing
audio out the left front and right front speakers.
Make sure your Blu-ray or DVD player is properly setup to send surround information out
of the HDMI or digital ports. For systems using HDMI, the best performance is “Bitstream”
mode. For systems using optical out, make sure the system is sending out Dolby Digital
or DTS, not “downmix” or “PCM.” Please refer to your player’s installation manual for
detailed instructions.
3. When the On Screen display shows a speaker is missing, that means it is not
connected to the Enclave Smart Center audio system.
Check the following:
1. That all of your speakers are connected to the proper respective power adapters
and the tips securely plugged into the rear speaker power port. Be sure to check
that the opposite end is firmly connected to your primary power source (wall,
power strip, etc).
2. Is the rear panel LED flashing? If so, refer to section 1 in this troubleshooting
segment of the manual. If the issue persists please call Enclave Audio support
at
844-436-2528.
3. If the LED is constant, and the rest of the system is working, please call Enclave
Support at 844-436-2528 for further assistance.
4. I set everything up, but the locations aren’t working correctly.
Please be certain that your speakers are placed properly in accordance with the included
placement diagram. Check the label on the rear of each speaker to confirm the proper
speaker is in its correct position in the system.