Enclave Audio CINEHOME HD SERIES, Руководство пользователя

Страница: 5 / 16

p.
3b. Subwoofer & Satellite Speaker Rear LED/Illuminated Indicator
The Subwoofer, Front and Rear satellite speakers have a rear LED that will flash prior to
network connection. If either the subwoofer or a satellite speaker LED’s is flashing, they
are NOT connected to the network. When the LED’s are illuminated in a constant state,
they are successfully connected and paired to the network. When the Enclave Smart
Center is powered off all speaker LED’s will turn off.
If you believe the satellites should be connected to the network, but remain flashing,
refer to the troubleshooting section for possible solutions. If you find a speaker that
remains flashing after pairing then please refer to the troubleshooting section for
possible solutions.
3c. Enclave Smart Center Rear Panel Connections
LED light One HDMI output
LED light switch Three HDMI inputs
Stereo analog audio input DC Power Input
Optical digital input
4. CONNECTING YOUR SOURCES
Connect your input sources to the Enclave Audio CineHome HD Smart Center inputs that fit
them best. See the examples below:
4a. Example 1: HDMI
When connecting a source with an HDMI output, it is recommended that the HDMI
connection is used for both audio and video. This ensures the highest quality audio and
video is used. Also, use the supplied HDMI cable for output to the tv.
4b. Example 2: Non-HDMI Video Source
For connections that don’t use HDMI, the Enclave Smart Center can accommodate
Optical, Analog 3.5mm, or Bluetooth from your mobile device or tablet.
4c. Enclave Audio CineHome HD Power Connection
• Enclave Smart Center: DC 18V 2.0A • Enclave Right Rear: DC 18V 1.0A
• Enclave Right Front : DC 18V 1.5A • Enclave Left Rear: DC 18V 1.0A
• Enclave Left Front: DC 18V 1.5A • Enclave Subwoofer: DC 18V 3.0A
1 5
2 6
3
4
7
4
1 2 3 4 5 6 7