Enclave Audio CINEHOME HD SERIES, Руководство пользователя

Страница: 6 / 16

p.
4d. Enclave Audio Mobile App
Be sure to visit the Apple App Store or Google Play to download the Enclave Audio
app for iOS or Android and wirelessly stream your device or networked based music
library using Bluetooth or Google Cast (Google Chromecast sold seperately) to your
Enclave Audio system. The Enclave Audio app also features such streaming music
services as Spotify, Tidal, Tunein radio and more. (Subscription may be required).
5. INSTALLATION AND SETUP
Follow these instructions to initially setup and use the Enclave Audio Wireless Smart Center,
remote control, and your Enclave wireless speakers.
Check out our video to see the setup in action at: http://www.enclaveaudio.com/setup
5a. PLACE YOUR SPEAKERS
1. Arrange your speakers as shown in the “General Speaker Placement” on the next page.
2. Make sure the center speaker is centered above or below the television screen.
3. The speakers must all point relatively toward the center of the room. Do not place
them behind furniture, plants, or other objects.
5b. CONNECT POWER AND SOURCES TO THE ENCLAVE AUDIO SMART CENTER
1. Plug in all power adapters to the rear connector on each speaker and sub
BEFORE plugging into wall outlets.
2. Plug all power adapters into your wall power outlets.
3. Plug in the Enclave Audio Smart Center.
4. Connect your audio and video sources to the Enclave Audio Smart Center.
5. Connect the HDMI Out to one of the television’s HDMI inputs.
5c. POWER UP
1. Press POWER on the remote control or the Smart Center control
panel on top of the speaker. The LED will dim when powered on.
2. The speakers will automatically pair. When turning the system
on
for the very first time, it may take up to 30 seconds for the
system network to be established. The On Screen display shows
“Resetting wireless speakers - Please Wait”.
Note: While the system is pairing to the speakers you will not be
able to turn off the power until the pairing process is completed.
Note: SATELLITE SPEAKERS & SUB BACK PANEL
When the Enclave Audio CineHome HD Smart Center is powered off,
the speakers go into a low-power standby state and should remain
plugged in at all times. The LED indicators on the rear of the speakers
will turn off. The speakers will “power up” again when you turn on the
Enclave Audio Smart Center.
3. The system will confirm ALL SPEAKERS OK when setup
is successfully completed.
4. System will default to the first HDMI input used as a startup source.
5