HIGH FRECUENCY EXTERNAL VIBRATORS
en
6
VEAF
NEVER USE the cord to carry the tool.
NEVER PULL the plug from an outlet.
KEEP cord away from heat, oil, sharp edges or moving parts.
REPLACE damaged cords immediately.
WHEN OPERATING a power tool outside, use an outdoor extension cord marked “H07RN-F”, “W-A”
or “W”.
These cords are rated for outdoor use and reduce the risk of electric shock.
4.3. PERSONAL SAFETY
S
TAY ALERT, watch what you are doing and use common sense when operating a power tool.
DO NOT USE TOOL while tired or under the influence of drugs, alcohol, or medication.
DRESS PROPERLY. DO NOT WEAR loose clothing or jewellery.
CONTAIN long hair.
KEEP your hair, clothing, and gloves away from moving parts.
AVOID accidental starting.
BE SURE that the switch is in the off (0) position before plugging the tool into the mains.
REMOVE adjusting keys or switches before turning the tool on.
DO NOT EXCEED the limit of your strength.
KEEP proper footing and balance at all times.
USE safety equipment. Always WEAR eye protection. USO DE LA
4.4. USE OF THE TOOL AND CARE
USE clamps or other practical way to secure and support the work piece to a stable platform.
DO NOT FORCE tool. USE the correct tool for your application.
DO NOT USE tool if switch does not turn it on or off.
DISCONNECT the plug from the power source before making any adjustments, changing
accessories, or storing the tool.
STORE idle tools out of reach of children and other untrained persons.
MAINTAIN tool with care.
CHECK for misalignment or binding of moving parts, breakage of parts, and any other condition that
may affect the tools operation. If damaged,
HAVE the tool serviced before using. USE only accessories that are recommended by the
manufacturer for your mode
4.5. SERVICE
Tool service MUST BE PERFORMED only by qualified repair personnel.
When servicing a tool, USE only identical replacement parts.
FOLLOW instructions in the Maintenance section of this manual.
