Version
Document Title
Release Date
01
WT 2.1
–
Owner’s Manual
2021-03-12
18
C
OMMISSIONING OF THE
WT
2.1
P
REPARING FOR
H
2
O
FLOWING
Now that the device is connected, here is what to do next to get the system running.
Pairing the Water Tank to the cloud
It is time to power on the device for the first time.
Using the Enapter app, add your device to a site. For detailed information on this, please refer to the
.
Step 1)
To start using the application, you need an account in the Enapter Cloud. If you already have
an account, skip this step.
To create an account, click on the create account button on the first screen.
Step 2)
After logging in on the Enapter app, create a site
–
a virtual environment that will house all
the telemetries collected from the devices in your system connected to the cloud via UCMs
(Universal Communication Modules).
Step 3)
Add the WT 2.1 to the site by scanning the QR code located on the system's front panel.
Refilling
Make sure to connect the device to a water purification system, or any other source of deionized
water, through the port "H
2
O IN" and make sure the outlet of the WT "H2O OUT" is also connected to
the electrolyser(s).
Your system is now ready to be commissioned for its first use.
Step 1)
Switch on the machine: the tank will start filling immediately. If this does not
occur, ensure the overfilling line is not obstructed.
Step 2)
When the tank's water level is high enough to start the pump, it will start
working.
Step 3)
The WT21 will automatically stop the refilling when the water level rises to
the
maximum.
After the start, the refilling must finish in 180 minutes; otherwise, the device will go into error mode.
If you have any questions about the safety, installation, and control of the WT 2.1, please refer to the
or contact Enapter support online via the cloud or by email or telephone.
7
https://handbook.enapter.com/mobile/mobile.html
8
https://handbook.enapter.com/electrolyser/wt21/wt21.html
