Version
Document Title
Release Date
01
WT 2.1
–
Owner’s Manual
2021-03-12
9
Caution!
•
Handle the electrical installation with care. Ensure that the plug is
fastened into the connector to avoid any loosening of the wiring.
•
Use only the supply voltage specified on the rear of the device.
•
Do not short-circuit inputs and outputs.
•
Do not reverse the polarity of inputs and outputs.
•
Do not use liquids near the product.
•
Never use the product if any part of it has been immersed in water.
•
Do not
touch the antenna when the unit is powered. Ensure you are
not charged before mounting/dismounting the antenna.
WARNING!
Always turn off the power supply when the product is being cleaned,
maintained, or transported.
Other than cleaning and routine user maintenance, any servicing must be
performed by trained, Enapter-endorsed technicians.
Thermal hazards
Thermal hazards such as burns and scalds for contact with high-temperature surfaces (which can only
present themselves in case of failure of some internal components of the device) can be prevented by
applying the following safety instructions:
•
Ensure the device can only be accessed by authorized and trained staff.
•
Operators and maintenance staff must wear appropriate Personal Protective Equipment (PPE)
when handling the device.
•
Remove the supply of power before any service, transport, and installation of the device.
•
Never open the device unless you have been specially trained for service by Enapter.
•
Other than cleaning and user maintenance, specialist personnel must perform any servicing
with the power supply switched off.
Environmental hazards
The device has been designed for use in standard ambient conditions, respecting stability
requirements (in the absence of seismic or hydrogeological events of intensity).
The WT 2.1 has not been designed for outdoor use. The User's responsibility is to protect the system
and all its accessories against atmospheric phenomena such as direct sunlight, rain, snow, and
lightning. For more information about the integration of the device in cabinets, please refer to
