The meaning of the parameters for the 802.1P QoS Settings are shown in the table below:
Configuration Guidelines:
For example, setting the scope ID 6 ~ 7 to the lowest queue being 0.
• Turn on QoS Setting & 802.1P QoS Setting
• 802.1P IP Scope Input 6-7, Priority set line 0
• Click Settings, then <Save> after setting
• Operation finished
Please note:
The arrangement of the equipment used for the WRR queue scheduling mode of relative priority:
Equipment in default setting priority 0 and 1 is mapped to the first priority queue. Namely the lowest
priority queue.
Priority 2 and 3 mapped to the second priority queue.
4 and 5 priority mapping to the third queue.
6 and 7 mapped to the highest priority queue.
All Rights Reserved © 1997 - 2017 Enable-IT
™
, Inc. Page
!
of
!
44
49
PARAMETERS
DESCRIPTION
QoS SETTINGS
ON / OFF
QoS ON / QoS OFF.
Default is OFF
802.1P QoS CONFIG
Traffic Priority - 802.1P QoS is defined by 8 levels, the
Highest Priority is
level 7
. 7 ~ 0,
0 being the lowest priority.
802.1P SCOPE
There are a total of 8 scope IDs. 0 ~ 8.
Default is 0.
The absence of other
priority values set is automatically enabled.
PRIORITY
Priority for 0 queue ~ 7,
7 queue is the highest priority.
